Powder Filling Machine

Product Details:

Description.
Automatic Auger type Powder filling machine is precision built on sturdy welded MS frame completely enclosed in stainless steel sheet and doors are provided to facilitate the servicing of machine. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body

 Operation.

The dried, sterilized and silicones bottles are fed through the infeed Turn Table on the infeed SS/Delran conveyor belt at the required speed for feeding. When bottle reaches under the filling head, it is held by the pneumatic bottle holder. Immediately it is be sensed by the bottle sensor and gives signals to magnetic clutch to start to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is set in the Timer. After filling of first bottle pneumatic bottle holder releases the first bottle to move on conveyor for next operation.

    Salient Features
         Automatic with filling range from250 Gms to 500 Gms

·         No container no fills system

·         Accuracy ± 1 or 3 % in single doze.

·         Body covered with SS sheet.

·         All contact parts SS 316.

 Optional Features

• Servo base PLC Control.
• Powder level sensor.
• Safety guards for all doors, motor & conveyor

Utility Requirement

Product Details:

Automatic Single Head Angur Powder Filling Machine offered  provide for faster and stable performance working support and support the demands of enhancing production efficiency a well as reducing production costs. Further, the technically advanced and easy to understand and operate PLC control also ensures precise and easier handling support. Some of its features include high quality and accessory support for consistent working performance, suitable for pesticides, glucose, powder material like coffee powder, spices, and others; can also be offered with support of optional accessories as demanded by the customers.

Operations:

• The dried, sterilized and siliconised containers are fed through the Infeed Turn Table on to Infeed Delrin slat conveyor belt at required speed to the feed work for correct spacing between two bottles and get enter into the infeed starwheel
• The infeed starwheel transfer the container below the funnel. The funnel plate with 16 nos. funnel mounted on it and the powder wheel is mounted on the centre pipe, which allows flexibility to adjust position of wheel as required and occupies less space on the machine
• The machine has a lifter assembly on the base bottom of the plate. When the container comes below the funnel, the bottom platform lifts the bottle whereby the bottle gets inserted tight fit inside the funnel
• The powder stored into the powder hopper is agitated by pair of mechanical agitators for maintain consistency and uniform bulk density, powder wheel rotates at the pre-set speed below the powder hopper with no clearance. Powder wheel consist of piston in each port and behind the powder wheel vacuum plate is provided and there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked into the port of powder wheel during vacuum according to the piston length.
• The different fill volume can be achieved.The excess powder is doctored off by a doctor blade and now doctor blades can be adjusted from outside without removing power hopper. When powder wheel indexes further and remain in the pot due to the vacuum till it reaches just in vertical position, the time dose of compressed air, sterilized low pressure air or nitrogen gas sequentially flushes out powder from the port of powder wheel into the funnel. Funnel equipped with square rod to break solid slug of powder and power will start to fill inside the bottle which is moving along with funnel
• The bottle is getting filled in around 5 to 6 seconds. The bottles further move with funnel and reaches to exit starwheel. After filling operation, filling head moves upward with help of cam and bottle enters into exit star wheel and move further on conveyor for next operation

Optional Features:

• PLC control
• Acrylic cabinet to avoid dust particle during operation
• Safety guards for trouble free operational
• Dust collection unit

Product Details:

Automatic Powder Filling Machine offered  provide for faster and stable performance working support and support the demands of enhancing production efficiency a well as reducing production costs. Further, the technically advanced and easy to understand and operate PLC control also ensures precise and easier handling support. Some of its features include high quality and accessory support for consistent working performance, suitable for pesticides, glucose, powder material like coffee powder, spices, and others; can also be offered with support of optional accessories as demanded by the customers.

Operations:

• The dried, sterilized and siliconised containers are fed through the Infeed Turn Table on to Infeed Delrin slat conveyor belt at required speed to the feed work for correct spacing between two bottles and get enter into the infeed starwheel
• The infeed starwheel transfer the container below the funnel. The funnel plate with 16 nos. funnel mounted on it and the powder wheel is mounted on the centre pipe, which allows flexibility to adjust position of wheel as required and occupies less space on the machine
• The machine has a lifter assembly on the base bottom of the plate. When the container comes below the funnel, the bottom platform lifts the bottle whereby the bottle gets inserted tight fit inside the funnel
• The powder stored into the powder hopper is agitated by pair of mechanical agitators for maintain consistency and uniform bulk density, powder wheel rotates at the pre-set speed below the powder hopper with no clearance. Powder wheel consist of piston in each port and behind the powder wheel vacuum plate is provided and there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked into the port of powder wheel during vacuum according to the piston length.
• The different fill volume can be achieved.The excess powder is doctored off by a doctor blade and now doctor blades can be adjusted from outside without removing power hopper. When powder wheel indexes further and remain in the pot due to the vacuum till it reaches just in vertical position, the time dose of compressed air, sterilized low pressure air or nitrogen gas sequentially flushes out powder from the port of powder wheel into the funnel. Funnel equipped with square rod to break solid slug of powder and power will start to fill inside the bottle which is moving along with funnel
• The bottle is getting filled in around 5 to 6 seconds. The bottles further move with funnel and reaches to exit starwheel. After filling operation, filling head moves upward with help of cam and bottle enters into exit star wheel and move further on conveyor for next operation

Optional Features:

• PLC control
• Acrylic cabinet to avoid dust particle during operation
• Safety guards for trouble free operational
• Dust collection unit

Product Details:

Product Details:

Hing Powder Filling Machine offered  provide for faster and stable performance working support and support the demands of enhancing production efficiency a well as reducing production costs. Further, the technically advanced and easy to understand and operate PLC control also ensures precise and easier handling support. Some of its features include high quality and accessory support for consistent working performance, suitable for pesticides, glucose, powder material like coffee powder, spices, and others; can also be offered with support of optional accessories as demanded by the customers.

Operations:

• The dried, sterilized and siliconised containers are fed through the Infeed Turn Table on to Infeed Delrin slat conveyor belt at required speed to the feed work for correct spacing between two bottles and get enter into the infeed starwheel
• The infeed starwheel transfer the container below the funnel. The funnel plate with 16 nos. funnel mounted on it and the powder wheel is mounted on the centre pipe, which allows flexibility to adjust position of wheel as required and occupies less space on the machine
• The machine has a lifter assembly on the base bottom of the plate. When the container comes below the funnel, the bottom platform lifts the bottle whereby the bottle gets inserted tight fit inside the funnel
• The powder stored into the powder hopper is agitated by pair of mechanical agitators for maintain consistency and uniform bulk density, powder wheel rotates at the pre-set speed below the powder hopper with no clearance. Powder wheel consist of piston in each port and behind the powder wheel vacuum plate is provided and there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked into the port of powder wheel during vacuum according to the piston length.
• The different fill volume can be achieved.The excess powder is doctored off by a doctor blade and now doctor blades can be adjusted from outside without removing power hopper. When powder wheel indexes further and remain in the pot due to the vacuum till it reaches just in vertical position, the time dose of compressed air, sterilized low pressure air or nitrogen gas sequentially flushes out powder from the port of powder wheel into the funnel. Funnel equipped with square rod to break solid slug of powder and power will start to fill inside the bottle which is moving along with funnel
• The bottle is getting filled in around 5 to 6 seconds. The bottles further move with funnel and reaches to exit starwheel. After filling operation, filling head moves upward with help of cam and bottle enters into exit star wheel and move further on conveyor for next operation

Optional Features:

• PLC control
• Acrylic cabinet to avoid dust particle during operation
• Safety guards for trouble free operational
• Dust collection unit

Product Details:

Product Details:

With our years of experience and knowledge, we are engaged in offering a wide range of Automatic Injectable Dry Powder Filling Machine. Our offered machine is compact model used for filling of Dry Powder Injectable in to vials. This machine is suitable for filling free flowing powders & granules, owing to which demanded in various industries. We provide this machine on different specifications keeping in mind the needs of customers.

Features:

• Easy to operate
• Compact design
• Sturdy construction

Product Details:

Product Details:

Semi-Automatic Auger Filler Machines is used for stuffing Machine. Auger product is also known as partial automated powder product which is used to complete precise body weight size powder in containers and pockets. This product is powder filling devices which is set to complete various types of powder. Auger filler is considered as the best available filling of powder product. Powder filling device is majorly usable for filling no cost streaming grains and non no cost streaming grains.

Product Details:

Product Details:

Description:

Semi automatic Auger type Powder filling machine is precision built on sturdy welded MS frame completely enclosed in stainless steel sheet and doors are provided to facilitate the servicing of machine. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body.Operation:

Containers have to place manually below the filling funnel at platform of machine, where motor operated auger fill desire pre set volume in container. Bottle guide is provided for precisely match for centering of container below auger to avoid spillage of powder on containerTechnical Specification:

Model :- APSAPF-30

Out put / Hour*:-       600-1200 containers

Number of head:-     1 No.

Fill Size*** :-  5 Gms to 1 Kg.

Electric Specification**:-     1 HP / 415 Volts / 50 Hz

Machine Dimensions**:-    1000 mm (L) x 1000 mm (W) x 1000 mm (H)

Net Weight :- 320 Kgs.

Gross Weight:-          575 Kgs.

Change parts required:-     (a) Auger   (b) Funnel

Input Specifications:

Container Neck Diameter*:-           Minimum 22 mm***

Container Size**:-    Round Shape:-        Ø 28 mm to Ø 100 mm

Respectively height:- 58 mm to 240 mm

(Height option for other bottle height available)

Flat / Square:-           15 mm to 100 mm (Length)

Respectively :-10mm to 50 mm (Width)

Respectively height:- 58 mm X 240 mm

(Height option for other bottle height available)

NOTE             *   Depends on Container size, fill size, Neck diameter of container, and nature of liquid etc.

** We can supply as per customer requirements.

*** With help of change parts.

Additional Information:

• Item Code: APMAUGM30
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P

Product Details:

Other Details:

• Fill Accuracy : ±3 – 5 % depends upon fill size, Powder Type, RH
• All Contact Parts in SS 316 
• Continuous Rotary System & Bottle Lifter Mechanism.
• Low Noise Level, Low Power Consumptions
• All contact parts can be easy dis – assembled for sterilization 
• Continuous motion design gives higher output on higher filling volumes
• Servo motor driven powder filling augur head
• Variable speed drive to control the machine output speed
• Different filling volume setting through PLC and Touch Screen
• Vibratory funnels for easy flow of powder to containers
• Alarm – in case of bottle jamming at both the star wheel.
• No bottle-no fill system
• Heavy duty stainless steel structure and heavy top plate for vibration free operation.
• Tool less easy fixing and remove of hopper and funnel.
• SS. safety cabinet covering full machine with acrylic.

Product Details:

Description.

• Automatic Auger type Powder filling machine is precision built on sturdy welded MS frame completely enclosed in stainless steel sheet and doors are provided to facilitate the servicing of machine. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body

Additional Information:

• Item Code: APAPF-40

Product Details:

Dry Syrup Filling Machine offered comprises vertical type screw filling machine that finds suitability for meeting the requirements f packaging items like flour, milk, powder and other. Further, its 304 grade stainless steel construction finish also makes these provide for lasting performance. Some of its features include allows for auto filling and measuring support, bag-making system adopting step motor with high precision working; advanced heating sealer with 4 sides of heating control, intelligent photoelectric controller system, adopt new hopper sets that offer easy adjustment and cleaning support.

Technical Specification:

• Model APPFL-40
• Output/Hour 2000-4000 containers
• Number of head 1 No
• Fill Size 5 Gms to 500 Gms (with the help of change parts)
• Electrical Specifications Main Machine 1.50 HP / 415Volts / 50 Hz
• Conveyor 0.25 HP / 415 Volts / 50 Hz
• Machine Dimensions 2000 mm (L) x 1100 mm (W) x 1700 mm (H)
• Case Dimensions 2200 mm (L) x 1300 mm (W) x 1900 mm (H)
• Net Weight 500 Kgs
• Gross Weight 750 Kgs 

• Servo base PLC Control
• Acrylic cabinet
• Powder level sensor
• Safety guards for all doors, motor & conveyor

Product Details: